KRONfol - Permeable underlays - KRONmat

KRONfol - Permeable underlays

KRONfol - Permeable underlaysKRONfol roofing membranes are intended for use as underlays beneath the primary roof covering in pitched roof structures. When selected and installed in accordance with the roof design and installation instructions, they form an additional layer that supports the drainage of water entering beneath the primary covering and helps limit the exposure of the roof structure and thermal insulation to moisture.


Depending on the product variant, the declared properties of KRONfol membranes may include:


 

 

Properties relevant to the roof structure

  • Water-vapour transmission expressed by the declared Sd value.
  • Resistance to water penetration according to the class declared in the Declaration of Performance.
  • Tensile strength and resistance to tearing, with values stated in the technical documentation.
  • Resistance to artificial ageing, including exposure to UV radiation under the conditions specified for the relevant test method.
  • Mass per unit area and dimensional parameters stated in the product documentation.

Functions in the installed roof system

  • Acting as an additional water-drainage layer beneath the primary roof covering.
  • Supporting the transfer of water vapour from the roof build-up, subject to the membrane’s declared Sd value and the design of the roof.
  • Limiting air movement through the membrane layer when overlaps, joints and penetrations are sealed in accordance with the installation instructions.
  • Supporting the protection of thermal insulation and structural elements against water entering beneath the primary roof covering.

The applicable parameters, classifications, test methods and limitations should be verified in the Declaration of Performance and technical documentation for the selected KRONfol membrane.

Types:

KRONfol membranes are intended for pitched roofs ≥ 20° under every type of roofing with air circulation along counter-battens.
KRONfol membranes protect roof structures with both habitable and non-habitable loft spaces. In the roofs with lower pitches (12°-19°) KRONfol membranes can be laid only when fulfilling special conditions which have to be taken into consideration in the roof design.

Types of vapor-permeable foils:

  Types of vapor-permeable foils: Types of vapor-permeable foils: Types of vapor-permeable foils: Types of vapor-permeable foils: Types of vapor-permeable foils: Types of vapor-permeable foils:
Technical specification KRONfol 100 KRONfol 120 KRONfol 140 KRONfol 160 KRONfol 180 KRONfol 225
Layers 3 3 3 3 3 3
Sd [m] 0,015 0,015 0,015 0,015 0,015 0,015
Resistance to water penetration before and after artificial ageing Class W1 Class W1 Class W1 Class W1 Class W1 Class W1
Temperature application range [°C] -40 do +120 -40 do +120 -40 do +120 -40 do +120 -40 do +120 -40 do +120
UV-stabilised [months] 3 3 3 3 3 3
Material polypropylene polypropylene polypropylene polypropylene polypropylene polypropylene
Fire class E-d2 E-d2 E E E E-d2
Use on full decking - yes yes yes yes yes
Logistic details            
Roll dimensions

1,6 m x 50 m
(80 m2)

1,6 m x 50 m
​(80 m2)
1,6 m x 50 m
​(80 m2)
1,6 m x 50 m
​(80 m2)
11,6 m x 50 m
​(80 m2)
1,6 m x 50 m
​(80 m2)
Number of rolls per pallet 49 49 36 36 25 25
Width
length
height
of pallet

1,2 m
1,65 m
1,1m

1,2 m
1,65 m
1,15 m
1,2 m
1,65 m
1,2 m
1,2 m
1,65 m
1,25 m
1,2 m
1,65 m
1,3 m
1,2 m
1,65 m
1,35 m

Download

Foldery i katalogi

Catalogues and Brochures

Deklaracje CE Declarations CE
Deklaracje CE Fitting instructions and User manuals